The principle of Tube And Par is to control the direction of movement of the pneumatic system by the electrical system through the cooperation of the gas and oil type and to push the oil circuit for a linear round-trip movement, and in the round-trip movement, the signal detected from the trailing plate limit is used as the basis to control and change the gas. In the round-trip motion, the signal detected by the trailing plate limit is used as the basis to control and change the movement of the air and oil circuit, to achieve the expected route of tool travel. Next, let's take a look at the operating procedures and development of Tube And Part.

Solenoid Valve, as an actuator of automated instrumentation, has seen a sharp rise in usage in recent years. Next, let's take a look at the main features of the Solenoid Valve.

A solenoid valve is composed of the electromagnetic coil and magnetic core and is a valve body containing one or several holes. When the coil is energized or de-energized, the work of the magnetic core will make the fluid pass through the valve body or be cut off to achieve the purpose of changing the fluid direction. Solenoid Valve's electromagnetic components are composed of a fixed iron core, moving iron core, coil, and other components; the valve body part is composed of a sliding valve core, sliding valve sleeve, spring base, and so on. The solenoid coil is directly mounted on the valve body, which is enclosed in a sealed tube, forming a compact and compact combination. The failure of the Solenoid Valve will directly affect the action of the switching valve and the regulating valve. When the coil is energized or de-energized, the work of the magnetic core will make the fluid pass through the valve body or be cut off to achieve the purpose of changing the fluid direction.

Pneumatic Fitting is used in a variety of applications and can generally be divided into inner and outer diameter pipe seals, female and male threads, etc. The seal is driven by air pressure to expand the seal or grip the jaws to achieve a sealed joint. A great advantage of Pneumatic Fitting is that it can be combined with cylinders or clamps to create an automated operation. This works more efficiently and reduces labor costs. Here are some answers.

The differences between manual quick release couplings and Pneumatic Fitting can be seen firstly in the way they are operated and secondly in the testing requirements of the application. We will now analyze them for you in the hope that they will help most industry sectors solve sealing connection problems and improve testing efficiency and stability. Here are some answers.

In our daily life, Solenoid valves​ and electric valves are relatively common. Many people do not understand the difference between Solenoid Valve and an electric valve. What is the difference between the two? Let's take a look.

Solenoid Valve has important applications in many industries. The selection of a Solenoid Valve should first follow the four principles of safety, reliability, applicability, and economy.

A Solenoid Valve is an automated basic component used to control fluids, belonging to actuators; it is not limited to hydraulics and pneumatics. A solenoid valve is used to control the direction of hydraulic flow. The mechanical devices in the factory are generally controlled by hydraulic steel, so Solenoid Valve is used. There are many kinds of solenoid valves. Different solenoid valves function at different points in the control system. Let's talk about the working principle of the solenoid valve first.

Pneumatic Fitting is a new type of hydraulic and pneumatic piping accessory which is oil resistant, acid, alkali resistant, and high pressure resistant. It has the advantages of reasonable structure, good sealing, and interchangeability, easy installation, quick installation and dismantling between pipes, labor-saving and time-saving, etc., and greatly reduces the labor intensity of employees. Its existence has greatly simplified our life. Here are some answers.

The development process of Solenoid Valve as the application of Solenoid Valve becomes more and more extensive and the requirements for Solenoid Valve become higher and higher, more and more refined and stricter Solenoid Valves are derived. The development process of Solenoid Valve always accompanies the market. The pace of follow-up is mainly due to the surge in demand for various special Solenoid Valves. The following is an introduction by media category.

Pneumatic Fitting is a type of quick coupling widely used in air configuration and pneumatic tools to connect or disconnect pipes without any tools. It is mainly used to connect air compressors, air screwdrivers, impact wrenches, air pipes, grinders, air drills, and many other pneumatic tools. I think not many people know how to use Pneumatic Fitting, today I will introduce the types of Pneumatic Fitting and how it should be used. Here are some answers.

Tube And Parts are lightweight, easy to carry, and easy to operate in the field. You can use it to cut steel, plastic, copper, cast iron, stainless steel, and multi-layer pipes. Next, let's take a look at the introduction of Tube And Part. Here are some answers.