Usage of three different types of Pneumatic Fitting

Pneumatic Fitting is a type of quick coupling widely used in air configuration and pneumatic tools to connect or disconnect pipes without any tools. It is mainly used to connect air compressors, air screwdrivers, impact wrenches, air pipes, grinders, air drills, and many other pneumatic tools. I think not many people know how to use Pneumatic Fitting, today I will introduce the types of Pneumatic Fitting and how it should be used. Here are some answers.

Here is the content list:

• Usage of Pneumatic Fitting with both ends open.

• The use of Pneumatic Fitting with a single open/closed circuit.

• Usage of Pneumatic Fitting with both ends open and closed.

Usage of Pneumatic Fitting with both ends open.

First of all, when Pneumatic Fitting is linked, the sub-body is inserted into the female body, and the collar is pushed to the previous position under the action of spring pressure, causing the steel ball to lock, and the fluid will flow, while the O-ring inside is playing the role of placing the fluid leakage. When it is the case of no link, the collar on the female body will be pushed to the other end and the steel ball will automatically roll to the outside, in this case, the sub-body will be moved out, and since both the sub-body and the female body have no valve, the fluid inside will flow outward.

The use of Pneumatic Fitting with a single open/closed circuit.

First of all, also in the case of the Pneumatic Fitting link, insert the sub-body on the side of the mother with the collar, then the valve will be opened and the fluid will naturally flow out, furthermore, the gasket will be pushed back to the original position under the force of the spring, then the stainless steel bead will automatically lock to ensure the connection between the sub-body and the mother, and the gasket inside will completely prevent leakage of fluid. In the case of no linkage, when the collar on the female body is moved to the other end, the stainless steel bead will automatically roll outward, and the sub-body will be popped open by the reaction force of the spring. The valve will then automatically close, thus blocking the flow of fluid.

Usage of Pneumatic Fitting with both ends open and closed.

When Pneumatic Fitting is not linked, the collar on the female body will automatically roll the stainless steel bead outward in the case of the other end, and the child and the female body will automatically disconnect due to the condition of the force acting on the valve spring, thus the respective valves of the child and the female body will close, quickly blocking the flow of fluid. In the case of link, insert the sub-body to the mother, and the force of the spring will push the collar to the original position, while the ball will automatically lock, to connect with the sub-body precision, this time the valve of the sub-body and the mother will open under the action of mutual push, fluid flow, and the O-ring will start to work, completely blocking the leakage of fluid.

The above is an introduction to the use of Pneumatic Fitting, Pneumatic Fitting connection flange should be the valve flange, if you encounter a hard texture, high temperature, or corrosive gases, according to these conditions choose unique materials Pneumatic Fitting, if you are interested in Pneumatic Fitting interested, you can contact us, our website is https://www.anruk.com/, welcome, looking forward to working with you.