At the end of the year, many Tube And Part customers still need to do a vital job after the next batch of goods on hand, that is, the maintenance of our Tube And Part in the case that Tube And Part are temporarily not needed. For companies that must produce and process pipe fittings, Tube And Part is an indispensable machine in our work, after a long period of operation, the parts will be damaged, so how to alleviate the rate of damage to Tube And Part? Here are some answers.

A solenoid valve is an electromagnetically controlled industrial equipment, which is the basic element of automation for controlling fluids. It belongs to the actuator. It is used to adjust the direction, flow, speed, and other parameters of the medium in the industrial control system. Solenoid valves can be matched with different circuits to achieve the required control and ensure the accuracy and flexibility of the control. Solenoid valves can be divided into three principal categories: direct-acting solenoid valves, step-by-step direct-acting solenoid valves, and pilot-operated solenoid valves.

When installing products such as Solenoid Valve, users should pay attention to some basic operational issues. Whether the Solenoid Valve is installed correctly will also have a great impact on the efficiency and stability of the Solenoid Valve product, and will accelerate the wear rate of the Solenoid Valve components and reduce the service life. It is more likely to cause accidental damage to the Solenoid Valve due to improper operation.

It is an electromagnetically controlled industrial equipment that adjusts the direction, flow, speed, and other parameters of the medium in the industrial control system. The frequency of Solenoid Valve failures in the production site is not much. The main failures are mostly caused by the poor quality of the Solenoid Valve's control medium or control air source. Usually, the following conditions inside the Solenoid Valve prevent the Solenoid Valve from working normally. The reason for shortening the service life is that the medium changes during use, then the pipe rusts, then the oil in the air compressor is oxidized, resulting in carbon particles, tar, and other debris, which are mixed into the pipeline, or there is dust and dirt in the pipeline, etc. Impurities will cause the Solenoid Valve pilot valve air control to be blocked or the valve core to be jammed; finally, the Solenoid Valve coil is electrified and burned out.

There are many different kinds of Tube And Parts in the Tube And Part market, and there are several sub-categories of Tube And Parts with better precision and higher cost performance, such as manual, semi-automatic, automatic, and a new type of Intelligent Tube And Part. How choose a suitable and cost-effective Tube And Part for a pipe cutting and processing company requires certain skills and practical verification. How to choose a tube and part that saves labor and cost and has high-cost performance, you can start from the following aspects. Here are some answers.

The principle of Tube And Par is to control the direction of movement of the pneumatic system by the electrical system through the cooperation of the gas and oil type and to push the oil circuit for a linear round-trip movement, and in the round-trip movement, the signal detected from the trailing plate limit is used as the basis to control and change the gas. In the round-trip motion, the signal detected by the trailing plate limit is used as the basis to control and change the movement of the air and oil circuit, to achieve the expected route of tool travel. Next, let's take a look at the operating procedures and development of Tube And Part.

Solenoid Valve, as an actuator of automated instrumentation, has seen a sharp rise in usage in recent years. Next, let's take a look at the main features of the Solenoid Valve.

A solenoid valve is composed of the electromagnetic coil and magnetic core and is a valve body containing one or several holes. When the coil is energized or de-energized, the work of the magnetic core will make the fluid pass through the valve body or be cut off to achieve the purpose of changing the fluid direction. Solenoid Valve's electromagnetic components are composed of a fixed iron core, moving iron core, coil, and other components; the valve body part is composed of a sliding valve core, sliding valve sleeve, spring base, and so on. The solenoid coil is directly mounted on the valve body, which is enclosed in a sealed tube, forming a compact and compact combination. The failure of the Solenoid Valve will directly affect the action of the switching valve and the regulating valve. When the coil is energized or de-energized, the work of the magnetic core will make the fluid pass through the valve body or be cut off to achieve the purpose of changing the fluid direction.

Pneumatic Fitting is used in a variety of applications and can generally be divided into inner and outer diameter pipe seals, female and male threads, etc. The seal is driven by air pressure to expand the seal or grip the jaws to achieve a sealed joint. A great advantage of Pneumatic Fitting is that it can be combined with cylinders or clamps to create an automated operation. This works more efficiently and reduces labor costs. Here are some answers.

The differences between manual quick release couplings and Pneumatic Fitting can be seen firstly in the way they are operated and secondly in the testing requirements of the application. We will now analyze them for you in the hope that they will help most industry sectors solve sealing connection problems and improve testing efficiency and stability. Here are some answers.

In our daily life, Solenoid valves​ and electric valves are relatively common. Many people do not understand the difference between Solenoid Valve and an electric valve. What is the difference between the two? Let's take a look.

Solenoid Valve has important applications in many industries. The selection of a Solenoid Valve should first follow the four principles of safety, reliability, applicability, and economy.