The standard use and routine maintenance of Pneumatic Fitting

Pneumatic Fitting is a new type of hydraulic and pneumatic piping accessory which is oil resistant, acid, alkali resistant, and high pressure resistant. It has the advantages of reasonable structure, good sealing, and interchangeability, easy installation, quick installation and dismantling between pipes, labor-saving and time-saving, etc., and greatly reduces the labor intensity of employees. Its existence has greatly simplified our life. Here are some answers.

Here is the content list:

• The standard use of Pneumatic Fitting.

• Pneumatic Fitting routine maintenance.

The standard use of Pneumatic Fitting.

First, use within the specified pressure range. If the pressure is too high, the joint will be squeezed out of the original seal by the pressure, which is very dangerous and can easily damage the product. Second, use within the specified sealing range, oversized use of the seal and the original seal between the sealing contact pressure is not enough to achieve the sealing effect; ultra-small use will increase the wear of the seal and metal jaws, shortening the life of the sealing joint. Third, use within the specified insertion depth, because the sealing principle of Pneumatic Fitting is to squeeze and generate friction so that the seal and the pipe diameter form a sealing surface, friction makes the joint fixed in the pipe diameter, and the insertion depth is too small, friction is not enough, the joint will be extruded by the pressure, resulting in danger. Fourth, Pneumatic Fitting inflation pressure to be within the prescribed range, the pressure will cause Pneumatic Fitting over-expansion to shorten service life; pressure is too small to reach the degree of expansion of the joint sealing effect cannot be achieved.

Pneumatic Fitting routine maintenance.

First, should adhere to the Pneumatic Fitting drum and the internal cleanliness of the pipe. New equipment should pay special attention to the need to add filters to prevent abnormal wear and tear of foreign objects formed on the torsion joint. Second, because the machinery will not be used for a long time and will cause scaling and rust inside the joint, please pay attention to the occurrence of jamming or dripping when using it again. Third, with oiling installation, please fill the oil regularly to ensure the reliability of the Pneumatic Fitting bearing operation. Fourth, the fluid heat medium Pneumatic Fitting should be gradually warmed up to prevent a drastic temperature change. Fifth, reflect on the seal surface wear and thickness change (normal wear for 5-10mm); look at the sealing surface of the friction track, to see if the three points of discontinuity or, scratches and other problems, if there is on the situation, should be immediately replaced. Sixth, Pneumatic Fitting should be taken lightly, strictly by the impact, so as not to lose the joint components. Seventh, it is strictly forbidden for foreign objects to enter the inside of the rotary joint.

The above is to share with you about the Pneumatic Fitting connection and routine maintenance of the content, I hope that my simple explanation of the above, can make you a better understanding of the Pneumatic Fitting product. If you are interested in our products or have other needs, please feel free to contact us. Our official website is https://www.anruk.com/. Our cost-effective products will bring you a better experience.