Air Blow Gun precautions and common failures

The Air Blow Gun is mainly used for dust removal in factories, installation, and maintenance, and is best suited for cleaning in narrow, high places and air ducts that are not accessible by hand. Here are some answers.

Here is the content list:

• What are the precautions for Air Blow Gun?

• What are the common failures of Air Blow Gun?

What are the precautions for Air Blow Gun?

First, the Air Blow Gun must be installed and used following the operating instructions; second, the Air Blow Gun must be used by connecting it to a compressor. Third, keep the Air Blow Gun clean and free of oil and dust. Fourth, the Air Blow Gun should be cleaned regularly to prevent a large number of other objects from accumulating on top of the Air Blow Gun's parts, and when cleaning, the power should be cut off. Fifth, the Air Blow Gun should not be used in an environment containing flammable gases and large amounts of dust. sixth, non-professional personnel should not repair the Air Blow Gun without authorization.

What are the common failures of Air Blow Gun?

In the process of using an Air Blow Gun, due to normal wear and tear, improper operation of workers, or the influence of other human factors, may lead to the failure of the tool. The easy-to-wear parts are O-ring, piston, cylinder body, air inlet switch, spring, etc. In addition, the failure of the rotary tool is generally manifested as the tool does not rotate or rotates weakly, the parts prone to failure are: 

First, the rotating part is common to all rotary tools. Because is dependent on compressed air to drive the rotor to rotate and work, the use of the process of normal wear and tear, blade, bearing, and other accessories damage, easy to cause the tool to powerless or not turn. General wearing parts for the rotor, blade, chassis, bearings, O-rings, cylinder body, etc.

Second, the transmission part for part of the rotary tool has the part. Relying on compressed air to drive the rotor driven by the blade rotation, the use of gears or drive shaft transmission and work, due to bearing, gears, and other accessories of the wear and tear reasons, resulting in the tool rotation powerless or not turn. General wearing parts are gears and matching bearings, etc. 

Thirdly, the striking part is the part common to the wind wrench and the wind batch. Wind wrenches and wind batches rely on compressed air to push the blades to drive the rotor to rotate and work through the rotor to drive the striking part, which is easy to cause the tool not to rotate or rotate without force due to the wear and tear of the striking shaft, striking block and other stressed parts, etc. The general wearing parts are the strike shaft, strike block, strike frame, and strike pin. Fourth, the air intake part is common to all Air Blow Guns. Due to normal wear and tear or other reasons, the air inlet and other parts are broken and worn. General wearing parts are air inlet port, spring, top rod, O-ring, and gasket. Fifth, the switch part is common to all Air Blow Guns. General wearing parts are a trigger, pin, steel ball (valve), etc. Sixth, the air adjustment part is the part that most Air Blow Guns have. Due to the wear and tear of the positioning ball or popping off, the valve breakage, and other reasons, it is easy to cause the Air Blow Gun to work in an unfixed position, the reversing valve forward and reverse control slightly crosstalk phenomenon. General wearing parts are: steel ball, locking ross, air change (to) valve, gear switch, etc.

Our official website is https://www.anruk.com/. If you are engaged in work related to Air Blow Gun or want to know more about our company, you can communicate with us on the website. Our cost-effective products are popular among everyone.