Notes on the use of Pneumatic Fitting

Pneumatic Fitting, also known as Pneumatic Quick Fittings or Pneumatic Quick Seal Fittings, is primarily used to efficiently seal jointed fittings in leak testing and is suitable for a wide range of sealing applications such as metal fittings, plastic fittings, coated tubes, and more. Although very practical, there are many precautions to take when using Pneumatic Fitting to maintain it for a longer period. Let's take a look at the precautions and benefits of Pneumatic Fitting. Here are some answers.

Here is the content list:

• There are several precautions to take when using Pneumatic Fitting.

• What are the advantages of Pneumatic Fitting?

There are several precautions to take when using Pneumatic Fitting.

Firstly, Pneumatic Fitting is only suitable for testing with gases such as air, nitrogen, helium, etc. It is not suitable for use with fluids other than gases. 

Secondly, when using it, take care not to exceed the rated pressure range. 

Thirdly, Pneumatic Fitting should not be used over the rated temperature range. High temperatures can easily lead to seal leakage due to deformation of the seal, resulting in damage, please determine the applicable temperature range before use. 

Fourth, Pneumatic Fitting use to pay attention to positioning and limit, to avoid inaccurate positioning of the product orifice on the seal to cause damage, etc. 

Fifth, when using to pay attention to the use of the scene, cannot be mixed with metal powder or sand and dust to use the place, will cause the joint inside the joint to wear or blockage, poor work, or leakage. 

Sixth, Pneumatic Fitting use, also needs to pay attention to the timely cleaning of the product orifice surface impurities. 

Seventh, when Pneumatic Fitting is not in use, it should be promptly covered with a dust cap to prevent dust from entering, and dry and ventilated for preservation. Also do regular checks, which will extend the service life of the Pneumatic Fitting and thus reduce the cost of the business. 

Eighth, please do not disassemble the joint structure by yourself, if there is damage to the parts in use that need to be replaced, please determine the specifications before replacement. Do not look at the same and replace it directly, the internal structure of the Pneumatic Fitting is designed to be precise and easy to damage by disassembly.

What are the advantages of Pneumatic Fitting?

Firstly, Pneumatic Fitting is pneumatically driven, highly efficient, and accurate, and can be used for automated integration with production lines. 

Secondly, Pneumatic Fitting does not require fire and can be used to achieve spark-free pipe connections in flammable and explosive hazardous installations with high safety. 

Thirdly, the Pneumatic Fitting is mechanically sealed to the pipeline, allowing for homogeneous or dissimilar material connections and good vibration resistance, without the need for repeated reinforcement by external forces. 

Fourthly, there is no need for complicated preparatory work such as drying and adding raw material strips before installation, and only tightness and strength tests are required after installation. 

Fifthly, the installation tools are compact and light, easy to operate, easy to learn, and easy to understand, no need to equip special equipment professionals. 

Sixthly, Pneumatic Fitting is not affected by climate or working space, and the connection can be done wherever personnel can reach. 

Seventhly, Pneumatic Fitting is a revolutionary innovation in the field of pipe joining because of its high efficiency and savings in the overall cost of pipe joining.

If you are interested in our Pneumatic Fitting products or have other requirements, please do not hesitate to contact us. Our official website is https://www.anruk.com/. Our cost-effective products will bring you a better experience.